About michael.porter

michael.porter · 07-03-2017

I have just got in a new switch, that replace a broke one and I am having some issues. I at one point had 2 stackable switches. The ID 1 (Master) switch reset button was broke and I had to get a new one (same model). I setup my ID 2 switch to be t...

michael.porter · 06-13-2017

I have tried multiple times to download Switch Startup Configs for my SG500's. Through HTTPS/HTTP I continually get a "Failed-Network Error". I have tried this using multiple browser. Has anyone ever had this issue?

michael.porter · 06-01-2017

I have done something and not sure how to fix it. I thought, "Hey ask people who know it all"!! I have within the SG500 switch GUI interface under the "IP Configuration"---> "Management and IP Interfaces"---->IPv4 Interface, I entered the correct s...

michael.porter · 09-14-2016

SG500 52 Port Switches Newbie here! What would be the issue is certain ports, which are set with a VLAN of 3 are giving out the correct addresses through the DHCP, but when another port, which is set to VLAN 4, when a device is connected, is giving...

michael.porter · 07-18-2017

Leo, Thank you for all your help. Once the firmware was downgraded on the new switch, everything fell into place. Thanks again for all your help.

michael.porter · 07-17-2017

Leo, Thank you for your reply. I did not check the firmware on the new stack. I will look at this and upgrade or downgrade the stack. Zero Config, doe you mean a factory reset? If so I will make sure that is done. I am coming into work thi...

michael.porter · 07-14-2017

I appreciate your response. When I turn on the replacerment switch (new switch) it comes up with a ID of 1. At that point the switch which I am currently using as ID1 resets and all the lights come on. At this point I would like to factory reset b...

michael.porter · 07-13-2017

I appreciate the response. So here is what I did. I took the configuration file from the old switch (ID1). I then logged into the new switch and added the configuration. I want the second switch (ID2) to stay the same, but when I power on the new...

michael.porter · 06-01-2017

I have found the answer. If you need to update the VLAN of the switch here is how you do it in console: switchxxxxxx# configure terminal switchxxxxxx(config)#interface vlan (what you want to change the switch VLAN to) switchxxxxxx(config-if) ip addr...

Member Since	‎09-14-2016 12:42 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	10

User Statistics

User Activity

Stacking a new switch onto another stackable switch issue.

Backing up Switch Configs

Switching the VLAN interface on a switch through Console

Issues with VLAN's and DHCP

Leo,

Leo,

I appreciate your response.

I appreciate the response.

I have found the answer. If