Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently upgraded our phone infrastructure from 11.5.x to 12.5.x. This phone was being used by a remote employee (via MRA) before the upgrade. After the upgrade, the phone did not appear to get the necessary firmware update (appears to be a coup...
We have an ASA 5510 and have recently made the move from the Cisco VPN client to the AnyConnect client (version 3.0.3054). I can make the VPN connection, I can ping any host on the LAN (by IP address, NetBIOS name, and FQDN). I can also make a remo...
I recently upgraded this unit to IOS from VxWorks. I then tried to upgrade the IOS to the latest 12.3(8)JEC and something went wrong. Now all I can do is connect to the AP via the console. On restart I get the following:The system is unable to boo...
We recently implemented a Microsoft File and Printer Cluster using Windows Server 2003 Enterprise edition. Since doing this people using the VPN cannot access the resources in the cluster. They are able to access all of the other servers on the net...
Option 150 is setup in DHCP and the TFTP server is working. I was able to connect to the web interface on the problem phone. The UI is totally different from any other 8851 on our network. It shows Cisco IP Phone for 3rd Party Call control. I tri...
At first I would have thought the same. However I have the proper DNS and WINS servers defined in the ASA and I have verified them on the remote machine via ipconfig /all. I also found a technical article on cisco that gave several troubleshooting ...
Interesting article but I don't think it applies to my problem. I did some more testing from home last night and it appears to be a NETBIOS name resolution problem. I can't resolve the name over the VPN tunnel. I can see where it tries but for som...
