Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,Recently our network has slows down, ping response to local server is high about 500~800ms, and when I logged-in to our 8x 3750 stack and issue the command below, I found this:#Show switchSwitch# Role Mac Address Priority State ...
Hi Guys, Any suggestion on how to prevent, detect and contained IP conflicts/duplicats in Cisco switch network? Let us say I want to protect specific IP from assigning it to other host on the same vlan, is it possible?Thanks in advance!regards,Gagamb...
Hi Experts, I need your help to determine the meaning of error below? it was generated on our Core switch and please let me know how can we fix it. Thanks in advance!%DHCP_SNOOPING-4-QUEUE_FULL: Fail to enqueue DHCP packet into processing queue: dhcp...
Hi Guys,Good day! I will be installing a 2x Wireless AP (1242-AG) in 60m square room, I will install it in both ends of the room. My question is what are the guidelines that I will be considering in situation like this, e.g. channels to be used, % ov...
Hi Guys,We have an ASA5505 connected via Site-to-Site VPN, problem is the tunnel is disconnected at random time (intermittent), we have check the privacy settings (edes-sha1.. etc) for both sides and all are Ok.Except for the logs that showed up in A...
Thanks for the feedback guys.Actually I have rebooted the switches 2 times now, last week and now. The switch are working just fine a couple years ago and I am wondering how did this happen. CPU is high and blinking LED is quite faster than normal, s...
Thanks for the feedback guys.But what I would like to do is, I don't want users to use/assign to their PCs the 192.168.1.1 - it is not included in DHCP pool (192.168.1.100-192.168.1.250)Is it possible? can I bind the mac-address on it?regards,Gagambo...
Hi Leo, Thanks for your feedback.It will only serve inside the room, no need for outside. As for the channels, do you mean I do not need to manualy adjust the channel of Wireless AP?Thanks in advance!regards,Mark
