Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Cisco/OpenDNS team,My OpenDNS Home static IPv4 registration became "Inactive" despite dynamic IP updates always being disabled. I re-added it; the dashboard now shows the old inactive entry and a new entry displaying the correct IP. Dynamic update...
I have a Cisco 897 router acting as a simple L2TP VPN server which was configured using these steps: http://blogconfigs.blogspot.com/2010/07/configure-l2tp-ipsec-vpn-server-on.html VPN users are placed into main Vlan1 which can access everything. I n...
I have an simple network:
192.168.0.0/24 ---- Inside - Router - Outside 1.2.3.4
I have a web server inside at e.g. 192.168.0.10.
I port forward port 80 to my web server:
ip nat inside source static tcp 192.168.0.10 80 1.2.3.4 80
I wish to...
I have two offices - see attached diagram. They use 192.168.0.0/16 for private IP addreses.They're connected via site-to-site VPN. Mostly works well, except some traffic doesn't return and I think it's due to NAT?When a workstation in remote office...
Solved the problem!The problem and exact solution described here: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtmlThe solution here was:access-list 150 remark "Preventing static NAT from NATing priv...
