Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I use 802.1x to authenticate the company-network devices - authentication works fine.I do not use dynamic VLANS --> static VLAN-config on 802.1x ports --> authenticated devices have access to the network.Is ist possible to use a guest-VLAN? unauth...
hi, i have the problem that i want to reach a border-manager whith the vpn-client. for that i need protcol 57 (skip) going through the asa. i used a sniffer: i can see packets comming from the internet going through the asa to the border-manager. i c...
Hi,I've a PIX (6.3(3)) and Cisco-VPN-Client's (4.7.x).The ip-address for the VPN-connection is assigned by the PIX firewall (local pool). --> works fine but how can I change the subnet mask?The pool has the address: 10.a.b.x - 10.a.b.yThe subnet mask...
Hi, that's the Problem:When I try to connect MSN it's not possible.I saw that on the firewall:---305011: Built dynamic TCP translation from inside:inside-ip/1166 to outside:outside-ip/55586302013: Built outbound TCP connection 75493 for outside:65.54...
i use 7.2(1)(with failover).i also took a look at the releasenotes of the interim versions... found nothing for that problem.it's not so easy to update to an interim version because i need a lot of tests before...do you have experience with the inter...
Jay,in the log you can see that the 443-session has been closed one line befor.and then the Internet server tries to connect to the closed 443-session. --> denied by ACL incomingNo access to the config at the moment...ACL incoming just allow's SMTP.N...