Hello there,I have 2 ASA 5506 firewalls in failover state and anyconnect VPN running on it. We currently use a self-signed certificate on our firewall for VPN. Unfortunately this gives us a lower security rating when client run security tests on our ...
Dear Team,I have implemented Hot Standby Router Protocol (HSRP) on two routers, each with an uplink to the Internet Service Provider (ISP). I have also configured Secure Sockets Layer Virtual Private Network (SSL-VPN(anyconnect)) on both routers and ...
Hello team,Just a simple question - i have created a new vlan(112) on my nexus 6k and added it to my server trunk port and created a VM with interface of vlan tag 112. While checking there was no connectivity between.Configuration on switch: interf...
Hello,On eve-ng, I am unable to establish node-to-node communication in my lab (OSPF-BGP). I have five locations using Cisco IOL devices. VPCs are connected to multilayer switches.In an attempt to ping one location VPC(Virtual PC) to another location...
Hello team,I have purchased a new firepower 1010 device, the current version is 6.4.0-102. So is it possible to upgrade directly it to the 7.0.0 version?Any comments will be highly appreciable.Thanks.
Hi balaji,Router is Cisco csr1000v, IOS XE Software, Version 17.03.04aHSRP won't transfer the configs from active to standby for making both router identical. And o configured the HSRP on the sub interfaces where the traffic in/out - G1 is the ISP in...
Hi Balaji,Actually am using Proxmox as a type-1 hypervisor - on the hypervisor side Linux bridge is there and its Vlan aware!. Also there are VMs running successfully on Vlan12. Only the newly created vlan is not working!. I gave the IP 10.100.112.12...
Hello georg, I have problem with Router IP on the ISP link. I have marked the IP that I have issue with, pls find it below: $ Ping test to (31.42.53.226) from: Outside - Drop there! inside (R2 and neighbor Router R1) - Drop there! Questi...
Hello Balaji, Yes, it's a production network. I have marked the IP that I have issue with, pls find it below: $ Ping test to (31.42.53.226) from: Outside - Drop there! inside (R2 and neighbor Router R1) - Drop there! FYI - I have observed it hap...
