About janne.kuosmanen

janne.kuosmanen · 03-25-2014

I have a 5508 WLC pair setup in HA SSO mode and the primary controller keeps rebooting, while secondary is up and running.We had to take power off the primary, so we first made switchover by issuing redundancy force-switchover. Then powered primary o...

janne.kuosmanen · 03-26-2014

From SNMP log:Mar 26 09:33:02 ip-of-secondary ha-wlc1: *rmgrTrasport: Mar 26 09:33:02.408: #RMGR-3-INVALID_PING_RESPONSE: rmgr_utils.c:234 Ping response from ip-of-primary is invalid. Incorrect checksum.Mar 26 09:33:02 ip-of-secondary ha-wlc1: *osapi...

janne.kuosmanen · 03-26-2014

What would be the correct order to do upgrade in this situation with minimum outage?This is production environment (24/7) so learning by doing is not good method.AP:s are now in secondary WLC and cannot modify the controller configurations while prim...

janne.kuosmanen · 01-24-2013

we didn't open tac case, because we knew that we have to get rid of 4400 series because it doesn't support 7.3 software.

janne.kuosmanen · 01-24-2013

I tried all solutions mentioned here and those that I found via googling, but didn't manage to add our one controller to NCS. So we decided to upgrade all 4400 series controllers to 5500 series. Only thing I didn't try was upgrading NCS 1.1 to Prime ...

janne.kuosmanen · 11-27-2012

hi,Has anyone found solution for this case. I have also NCS version 1.1.1.24, and WLC 4402 7.0.235.0 that won't join to NCS. 4402 works fine with WCS. All other 4404 and 5508 controllers work fine with NCS.

Member Since	‎03-19-2012 02:24 AM
Date Last Visited	‎05-22-2019 12:07 AM
Posts	8

User Statistics

User Activity

WLC in HA Keep Rebooting

From SNMP log:Mar 26 09:33:02

What would be the correct

Re: NCS - Supported WLC?

Re: NCS - Supported WLC?

NCS - Supported WLC?