Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I connected a DeskPro to an MS120-8FP switch and configured dot1x with Multi-Domain authentication. The DeskPro gets placed into the voice vlan as expected, when connecting a PC it gets assigned the data vlan (both via CoA fromt eh Radius server). So...
We want to migrate from Microsoft OCS/MOC to Cisco IMP/Jabber and have several Interdomain federations based on SIP.
Looking at the documenration on CCO, ASA has to be configured as TLS Proxy. However, in all configuration examples ASA is within the...
Are you connection to a MX device or using Secure Connect? In Secure Connect, there's a feature called Split DNS which enables the client to use internal DNS servers for internal domains only and external DNS servers for any other domains, see here:C...
Thanks, I've been through that with no luck. I could actually solve the issue by creating a new access policy. It has exactly the same settings as the one I used before. I can reproduce the issue by switching between the two access profiles in the po...
Hi,
not a solution but a workaround. The error occurs if you have a split exclude configuration. If you do not tunnel all traffic it works.
Reason being that full tunneling changes the default route on the client. Once this happens The vSwitch cuts...
Hi,
do you have Hyper-V enabled on the machine that keeps reconnecitng? I have exactly the same issue with my machine, after disabling Hyper-V everything runs fine.
Just raised a TAC case for this.
