Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,One of our cleintis having VSMS/VSOM 6.2.1/4.2.1 with Virtaul Matrix. VSVM Client is 6.2.1 . the cleint is a dedicated PC which meets Cisco recomendation. We configured it to view 6 Cameras in a rotating format.the problem we are facing is the Mo...
hi,i have a client who allready implemented WLAN System with Cisco 4402 Controller and 1242 Access Points, now the controller's AP limit is full as it is maximum will support of 50 APs. now cleint doesn't want to invest more money with IT budget, so ...
hi,today i installed one Cisco 5508 Controller with 1262 APs only with 5GHz antennas. all radios are came up excpet 5ghz band, i tried all my level of best to get it UP. can anybody tell me if there is anything we need to really inspect to enable 5 G...
hi,i have one Cisco 4402 Contoler which is running in image 4.0 Version, and i tried to upgrade this image to 5.0 , but it stops tranfering data once it reached 33 MB of size, am using TFTP-D32 as tftp server, ( i checked Cisco TFTP Server too ), but...
Hi, could you please let me know the steps to do, its only for survey purpos, is it the same format of other APs, i tried the steps which i used to do for 1130 and so , but with 3502i its not worked.please let me know if there is another way to do ...
Hi Karan, thanks for your input, this was allready i try last days. anyhow there are some black strips sometimes abone the video panes or sometimes below. Onething i try it with a normal PC, again it is same.. bad luck.thanks,Anvar
Hi Leo,if your phones are at both ends ( i mean ONE at FAT Gorup and Another ONE at LWAPP group ) can it talk each other ?like it the ONE at FAT side was even at roaming in betwean FAT Groups still it can talk to LWAPP Phone Cleint without any discon...
Hi Talal,what is problem if WLC marked FAT APs and its cleints as rouge ? will it affect communication betwean 2 clients in both sides, i mean will it block communication betwean LWAPP clients and Fat Clients.thanks,Anvar
hi Nocolas, please find below answers, and attached snapshot1) what is your AP exact model ? -A ? -E ?Ans:- AP Model No - AIR-LAP1262N-A-K92) What country did you configure your WLC for ?Ans:- Saudi Arabia3) did you enable 802.11a network on t...
