12-29-2010 01:27 AM - edited 07-03-2021 07:36 PM
hi,
i have a client who allready implemented WLAN System with Cisco 4402 Controller and 1242 Access Points, now the controller's AP limit is full as it is maximum will support of 50 APs. now cleint doesn't want to invest more money with IT budget, so is there any problems if we are usign FAT APs which is not associated to WLC at all.
why am in this group is because of cleint is planning to impliment VOIP over WLAN as well, so is there will be any issues with mobilty in this case..???
thanks,
Anvar
Solved! Go to Solution.
12-29-2010 01:53 AM
hello Anvar,
if WLC mark it as rogue and has auto contain , it will send de-authentication frames.... causing client disconnections
however you can create rules , and add your autonomus AP's as frindly to WLC , so we avoid marking as rogue and trying to contian... that is why i said you have to be careful :-)
Kind regards
Talal
===========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily
12-29-2010 02:01 AM
12-29-2010 01:35 AM
Hello Anvar,
for romaing (mobility) it wouldn't work between autonomous (Fat) and LWAPP...and if voice phone move between AP (Fat) to WLC , it will loose connection and initiate new one.
also you would have possibilites of WLC marking autonomous AP and its cliets as rogue... so you have to be carful on that :-)
Kind regards
=========
Talal
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily
12-29-2010 01:48 AM
Hi Talal,
what is problem if WLC marked FAT APs and its cleints as rouge ? will it affect communication betwean 2 clients in both sides, i mean will it block communication betwean LWAPP clients and Fat Clients.
thanks,
Anvar
12-29-2010 01:53 AM
hello Anvar,
if WLC mark it as rogue and has auto contain , it will send de-authentication frames.... causing client disconnections
however you can create rules , and add your autonomus AP's as frindly to WLC , so we avoid marking as rogue and trying to contian... that is why i said you have to be careful :-)
Kind regards
Talal
===========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily
12-29-2010 01:37 AM
Shouldn't be. What's your autonomous AP config like?
I have mixed LWAP and autonomous in our network. Works fine with wireless VoIP (7921 & 7925).
12-29-2010 01:52 AM
Hi Leo,
if your phones are at both ends ( i mean ONE at FAT Gorup and Another ONE at LWAPP group ) can it talk each other ?
like it the ONE at FAT side was even at roaming in betwean FAT Groups still it can talk to LWAPP Phone Cleint without any disconnection.??
thanks,
Anvar
12-29-2010 02:01 AM
Yes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide