Hi Guys,I am currently using TACACS+ through ACS to authenticate network admins when connecting to cisco devices. I also have a few remote devices that are administered by someone else who uses a local account to log in to cisco de...
Hi Guys,I currently use TACACS+ with ACS to authenticate access to network devices. I also have a local account just in case the ACS servers are unreachable. As it stands now, ACS logs all my TACACS+ sessions. I would like to also log all local login...
Guys,I am getting this warning on ACS every few minutes. It is not effecting authentication at all but i would like to clear it up. See attached.If anyone could help with it, i would greatly appreciate it.Thanks,Randy
Hi all,I have 2 Cisco WLC 4400's connected to a WCS. I want to use this Location Tracking feature within the WLC 4400s so that i can track movement of particular network devices throughout my facility. I cannot find anything on how to set this up on ...
Hi all,I have 3 ACS servers placed throughout N. America. I it set up so that ACS01 is primary and ACS02 and ACS03 are secondary. When i look at the logs for passed/failed authentications in radius or tacacs I cannot see anything from ACS03 logging. ...
Ed,Thanks again. I thought i was, i just didnt see a command that had the key word "local". But i guess by stating i want T+ to be default, it will try that first, then fail to local?Thanks again for your help Ed,Randy
Thanks Ed,I guess that answers that. I have one more question.Is there a way to force logging on via TACACS+ unless the TACACS+ servers are not available, then allow local?Randy
I had the same problem and marked the default priv lvl 15 and the max 15 (this was only for the admin account) the guest account i set up uses default 1 max (none) and it works perfectly.you can #sho priv inside your cisco devie and it should say 15...
