Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey,
This is been giving me a lot of issues, I tried HTTP/TFTP through the GUI via IP of the Aironet and those were all giving errors (Invalid file format, cannot find file etc...)
Now I am trying through Telnet (also tried through CLI via SSH but s...
To assign a static IP to my firewall the ISP needs the mac address of my ASA 5505 firewall. Which mac address do I provide?
The Vlan 2 interface mac or Eth0/0 interface mac address?
I have attached my config.
Thank you!
So I never had this problem with an ASA 5505 firewall before. Only one specific computer can get an IP address and internet access when connected to the firewall. When I try to connect any other devices, the firewall freaks outs. I can see the lights...
A location I support internet has suddenly just stopped working out of the blue when connected to the firewall.
Setup:
Router is in bridge mode that connects to the firewall which handles everything else (providing ip/dns/internet access etc..)
It wa...
Thanks
Yea, I don't need to set it in the firewall. Basically I need to assign the mac address to the static IP address on the ISPs setting page which is why I needed it.
Thanks for your help! Hopefully its the right one haha.
