About wilsonribeiro

wilsonribeiro · 04-07-2017

Hi guys, I have interface Bundle-Ether1 ipv4 address 177.x.x.x 255.255.255.248 ipv4 address 177.y.y.254 255.255.255.0 secondary ! interface Bundle-Ether1.1349 ipv4 address c.c.c.c 255.255.248.0 encapsulation dot1q 1349 ! We're seeing arp-requ...

wilsonribeiro · 04-07-2017

Hi folks! I would like to know how to perform a packet capture. Example: tcp packets on port 179 coming to interface bundle-ether1 How would I monitor that in IOS-XR? Thanks

wilsonribeiro · 04-06-2017

Hello, I'm trying a simple BGP example here with asr9k ios 6.0.2 router bgp 100 address-family ipv4 unicast network 10.10.10.0/24 neighbor 1.1.1.1 remote-as 200 address-family ipv4 unicast route-policy filtroEntrada in route-policy ANUNCIO_200 out !...

wilsonribeiro · 02-08-2017

Our CISCO is accepting only around 8300 subscriber pppoe connections. It seems its some sort of session throttle, I'm getting lots of this: LC/0/0/CPU0:Feb 8 21:01:47.126 : pppoe_ma[309]: [PADR-Recv]: TenGigE0/0/2/1.136 peer- LC/0/0/CPU0:Feb 8 21:...

wilsonribeiro · 01-27-2017

Hello folks, I'm trying to enable SSH server per this instructions: http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r6-0/security/configuration/guide/b-syssec-cg-60x-asr9k/b-syssec-cg-60x-asr9k_chapter_01011.html#con_1027173_sysse...

wilsonribeiro · 06-22-2017

Hi Xander, Is it possible to search for subscriber in a case insensitive way? Ex: show subscribers session filter username X. I was searching for a customer using "login" and couldn't found it until I've noted he was connected using "Login" with the...

wilsonribeiro · 04-18-2017

Hi, real-life scenario causing problems.

wilsonribeiro · 04-17-2017

IOS 6.0.2, I have: interface Bundle-Ether1 ipv4 address 177.54.x.x 255.255.255.248 ipv4 address 177.54.y.y 255.255.255.0 secondary ! interface Bundle-Ether1.1349 ipv4 address 177.54.z.z 255.255.255.248 encapsulation dot1q 1349 ! I can see arp reques...

wilsonribeiro · 04-15-2017

It seems crazy, yes, but it is not a accounting case. The accounting records are stored on radacct table. The connection is stopped. Then, on radusergroup table we have an association between the username and the radius plan, and on radcheck table we...

wilsonribeiro · 04-15-2017

Other things that does client not connect: 1) It can't exist a duplicated record on radcheck table, radusergroup table for a username. I know this is not OK, however, it seems too strict to block client for a not critical element.

Member Since	‎09-23-2016 11:39 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	16

User Statistics

User Activity

asr9k - ARP requests through vlan on different subnet

ASR9K-IOS-XR 6.0.2 tcpdump??

asr9k - BGP - communication - route-policy issue

ASR 9000 BNG session limit issue

Which package has ssh server? ASR9000

Hi Xander,

Hi,

IOS 6.0.2,

It seems crazy, yes, but it

Other things that does client