Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I had to register a C9800-40 cluster to the company's smart account. These are the steps I followed:
1) set the correct license level (air-network-essentials + air-dna-essentials) on the active WLC (via GUI)
2) save & reload (both units rebo...
Hi,
I'm trying to add a couple of Nexus 93360YC-FX2 to an existing network built with some ASR 920 routers.
Physically, I've got a Catalyst 9500 in the middle temporarily: two edge ASR 920 routers are connected with Port-channels to the 9500 and so a...
I'm attaching some diagrams and pieces of config from both one ASR and one Nexus (the two I was able to make talk to each other on VRF Internet-Diretta).
Please let me know if I missed something.physicallogical
Nodo5A_export
ip vrf Internet-Direttard...
I assume you mean vrf route prefixes, right? I got them in the rib.
I'm also adding some additional info: I "splitted" completely the routing protocols, on the ASR I have now OSPF 1 to do what it was doing up to today and OSPF 2 to talk to the Nexuse...
Hi Rich,
the standy controller becomes active and the former active controller freezes.
We will check the package versions, PHY in particular (latest rommon is dated 15 nov. 2019 and the controllers are pretty new so I assume they will already have t...
Hi balaji.bandi,
I'm working on that customer too. The network diagram is very simple:2 wlc connected back to back with the RP port and having the TE0/1/0 connected to the core switch. HA mode is RMI+RP so disconnecting the TE0/1/0 interface from a W...