About jjessetej

jjessetej · 02-05-2023

I have AP: AIR-CAP3602I-A-K9 as standalone running: ap3g2-k9w7-xx.153-3.JH and wireless clients connected to it are only reaching below 100mpbs connection speed.. The circuit is 600mbps which is what i get with wired PCs when doing a connection speed...

jjessetej · 03-06-2022

hey guys, not sure if its even possible but i want to connect this switch behind my home router (ASUS GT-AC5300) who's IP is 192.168.1.2.. i have created 3 VLANs with 10.10.x.x as i want to have anything behind the switch with that network scheme, so...

jjessetej · 01-12-2022

we've had situations where there's a lot of saturation in our network and we narrow it down to an AP, but how do we locate the actual client connected to that AP doing the damage? once we get the mac address from our top talker discovering its on our...

jjessetej · 02-07-2023

I set the below;radio0 to ch11, data rates: for best throughputradio1 to ch157, data rates: for best throughput and width: above 40MHzthe above seem to have helped, now getting 160mpbs, is this the max this type of AP can provide? I have another AP i...

jjessetej · 02-06-2023

i want to troubleshoot by creating different SSIDs and select different channels, width etc.. in the webgui if i go to network > network interface > Radio0-802.11N 2.4GHz or Radio1-802.11N 5GHz i can make these changes, but it looks like it does it...

jjessetej · 02-05-2023

Hey Haydn, thanks for replying.. i logged in to the webgui and i see that both radio bands 2.4ghz and 5ghz are using 20MHZ. As far as channel noise, what tools do you recommend? i do see a bunch of SSDIs being advertised on my phone/laptop when im on...

jjessetej · 05-31-2022

sorry, i figured this one out.. when i was writing this, our top talker at the time it was a device that was wired in in a different VLAN, so i wanted to know where it was physically plugged in, but i was able to trace it down..

jjessetej · 03-09-2022

Hey guys, not sure if i should open another thread for this off subject question -- i later intend to add POE cameras and this switch isnt POE capable. Is there a way to quickly find out if a switch is POE, capable of doing routing and has 1gb ports ...

Member Since	‎01-12-2022 06:45 PM
Date Last Visited	‎07-14-2023 12:42 AM
Posts	11
Total Helpful Votes Received	10

User Statistics

User Activity

AIR-CAP3602I-A-K9 providing below 100mbps connection to clients

cant access the internet behind C3750

How can i locate heavy wireless user(s) in WLC saturating the network?

Re: AIR-CAP3602I-A-K9 providing below 100mbps connection to clients

Re: AIR-CAP3602I-A-K9 providing below 100mbps connection to clients

Re: AIR-CAP3602I-A-K9 providing below 100mbps connection to clients

Re: How can i locate heavy wireless user(s) in WLC saturating the netw

Re: cant access the internet behind C3750