Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Folks,I have one question that I need help!Core Sw ---> Access SwNative vlan is the same on both side.One I create a vlan on the core sw everything is okay, but once I do ont the access for every vlan I have below output on the core.using PVST!...
Hello folks,I am facing with a strange issue. configuring port on trunk mode but still it is showing Administrative Mode: static access Operational Mode: static access. I have tried to shut no shut interface but still the same issue. interface Gigabi...
I have configured the tunnel-profile the in the same way. As we well saml idp azure and truspoint the respective cert.Only one is wokring the other one shows Authentication failed due to problem retrieving the single sign-on cookie.I have found the b...
hi all,Thank you for your advices. By definition, these error messages are shown when vlan tag does not match the VLAN ID inside the spanning-tree BPDU. . The behavior was addressed under several different software defects which has been confirmed as...
Hi Torbjørn,Thank you for your reply. no VTP configuredbelow is spanning tree config:spanning-tree mode rapid-pvstspanning-tree extend system-idspanning-tree vlan 1-4093 priority 4096!interface Port-channel2switchport trunk native vlan 155switchport...
@balaji.bandi thank you for your reply.default int gi1/0/45Interface GigabitEthernet1/0/45 set to default configuration!interface GigabitEthernet1/0/45description WLAN-APswitchport trunk native vlan 204switchport trunk allowed vlan allswitchport mode...
@gajownik one more question. In the asa 5515 version 9.12(4) is it possible to add the second saml idp,saml idp https://sts.windows.net/{{ idp }}/{{ App ID }} - first onesaml idp https://sts.windows.net/{{ idp }}/{{ App TEST ID }} - second oneAfter...
