Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have created a VM's in UCSM and assign them to Vnic 1 . when I assigned vlan 27 to Vnic 1 it gives no response but when I assigned to default vlan 1 as native vlan, it's start pinging. Is it safe to use default vlan 1 as native vlan ??
Request to check compatibility and verify if the 25 Gbps SFPs in the FI (P/N #SFP-25G-SR-S will be compatible with the 16Gbps SFPs on the DS-6510B switch)
Hi,Thanks for the reply, presently I am using b200m4 blade server with two adapter mlom card and mezzanine card. As checked MLOM card is found faulty but Mezzanine card is working ok. But without MLOM card server is not reachable on network.Mezzanine...
Hi Syed,Thanks for the reply, Yes, we have two FI connected to both core switch. Also Vlans are created at both end. Host machine is already pinging with same vlan 27 as native. But when assigning same to Vm , its give not response unless i assigned ...
Hi Krik,Thanks for the reply. My query is m working in UCSM environment with CISCO chassis and blade server and would like to add a HP rack server in current UCSM setup. Can we add a third party server to UCSM? Is it mandatory to add only CISCO made...
