Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guysI have configured a multiple static NAT for a firewall (10.100.1.2) using ip nat inside source static on a 2600 router with one ethernet interface as inside and two ethernet interfaces and a serial interface as outside, using the following c...
Hi.I have configured an Easy VPN Client Mode connection between an ASA5505 as client at remote site and a VPN3000 Concentrator as server at HQ network, remote users can easily connect to HQ network, but users at HQ network could not communicate to re...
Hi,I have replaced an older 340 bridge for a new 1310 bridge, now, we are experiencing problems with devices behind the bridge, a parameter reviewing statistics on the new bridge is a high value of output errors in the radio interface. Someone can he...
Thanks Federico.No changes were made during the replacement, I have also tried natting over router interface and it works fine, I do not have more free IP addresses to test, but if PAT is working, I think there is no problem with the router nor IOS, ...
Hi,We are not using split tunneling, all traffic from remote users must be passed through VPN HQ connection. I know that, easy VPN ACLs are dynamically created, so, there is no need to configure additional ACLs at outside interface....Thanks.GA
Message displayed at PC w/VPN Client is "VPN Connection has been terminated by client. Remote Peer is no longer responding", there is not information available in the log screen of the VPN Client. Actually, we are reviewing log messages from ISA Serv...
