About plavielle

plavielle · 10-23-2024

Hi.I've like 20 sg250/sg350 switchs with latest firmware 2.5.9.54.I just use web interface to configure switch. I have configured my micrsoft AD server as the SNTP server.When switch boot (mostly when there is a power outage) until i'm going to press...

plavielle · 02-26-2024

Hi community.Someone can explain me how i can create an accesslist with webui to :deny network 10.64.128.0 to access network 10.64.66.0 and 10.19.2.0allow network 10.64.128.0 to access host 10.19.2.224 on port 4085 and 5093I have created an ACL "test...

plavielle · 11-14-2023

Hi Community.i have numbers of sg250 and 350 switch (16/24/48) and i experience difficulties to use WEB interface on these device.Someone can help me or give me a firmware version with http interface good performance. Thanks

plavielle · 08-10-2023

Hi.I need help to know what to buy. I want a material that can permit me to make intervlan routing at media speed. For now i have simple architecture with SG250 and 350 switch and most of the matérial on the same subnet. I can achieve intervlan routi...

plavielle · 08-10-2023

Hi.I have setup a fonctionning L3 SG250-08. Why L3 mode, because it works 1000 times more than in L2 mode (just test transfert file)My question was simple : as soons as i have configured some port in "switchport mode layer 3" all other port on the sw...

plavielle · 02-27-2024

This case can be close. I think i have made some mistake, but L3 routing is working well.Thanks.

plavielle · 02-27-2024

To close this ticket : DONT use HTTP to access switches, use HTTPS.Since that i use HTTPS, no more problems.Thanks

plavielle · 02-27-2024

Hi. After some "fight" with my switch i have found that de WEBUI is very unstable ( liviu.gheorghe what is your firmware version ???)Finally i have setup my acces-list and bind-it to vlan1 and all worksBut between each rule i add, i have to wait some...

plavielle · 11-21-2023

Hi. Community.I have reinstall my computer today and i have tested acces to switch web ui before and after install sophos interceptx on my computer.I think the antivirus cause the problem. I keep you informed

plavielle · 11-14-2023

On cisco site we can download 2.5.9.16 or 2.4.0.94 or 2.3.5.63 or 2.2.8.04. What is the best version. I have test a few 2.5 versions and had issue with numbers of them. What are the 'stable' versions ?????Thanks

Member Since	‎03-10-2022 01:16 AM
Date Last Visited	‎11-14-2024 07:44 AM
Posts	20
Total Helpful Votes Received	20

User Statistics

User Activity

SNTP unsynchonised until press on APPLY button

SG250 webui acceslist

Firmware version and http slowness

Help to buy the right matérial

SG250 routing L3

Re: SG250 routing L3

Re: Firmware version and http slowness

Re: SG250 webui acceslist

Re: Firmware version and http slowness

Re: Firmware version and http slowness