Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I currently have ISE 2.4 setup with 802.1x for wired authentication using PEAP with EAP-MSCHAP v2. This works great. Recently my System Admin team rolled out credential guard, this causes the EAP-MSCHAP to not work. I need to now do EAP-TLS, certific...
Good morning,
I have a Nexus connected to a 4500 connected L2 routed with EIGRP. I also have a VRF on the Nexus connected to the 4500. The vrf is working fine. What I am trying to accomplish, is being able to access the VRF from GRT on the Nexus.
H...
I have several VRF's throughout our network. One in particular is on a WS-C3750G-12S which has a tunnel to a GRE router, Cisco 2821. It uses a linux dhcp server. I don;t have any issues with it being UP, i see the eigrp neighbors for the tunnel. The ...
See below for the topology. The OTN device is the Multicast source, connected to the 2960 on VLAN 601. The end PC on VLAN 601, opens the stream properly at rtp/h264://@225.0.13.1:2001. However it doesn't open in VLC at all on the 600 vlan. I used wir...
Thanks everyone for your help. I was missing the machine cert AND the user cert for authentication. Without those on the supplicant, it wont even initiate the process. I was able to get this going, I have a rule as well in ISE where it attempts the ...
I do have the WIred AutoConfig set, so I do see the Authentication tab. I am using the native windows 10 supplicant. My system admins are quite sure what settings to have set and checked. I see there are 2 places to have the Smart card or certificate...
Hmm....it definitely looks correct and makes sense to me as well now. (*, 225.0.13.1), 01:02:16/stopped, RP 172.20.247.1, flags: SJCL Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Vlan600, Forward/Sparse, 00:36:05/00:02:02 ...
No worries, here you go.....added back the join group and here is the output. CoreMDF-4507(config-if)#do show ip mrouteIP Multicast Routing TableFlags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected, L - Local, P - Pruned,...
