About fdamian01

fdamian01 · 02-27-2016

Hi How do I set buttons with numbers or personal extensiones. As speed dial. Model 7861 phone Regards. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/user_guide/PA2D_BK_UB7EF0F0_00_user-guide-7821-7841-7861/PA2...

fdamian01 · 02-09-2016

I need to dial extensions based on username? ExampleThe user dial into the company and hear the welcome message "Are you talking to the X company if you know the number of the mark that extension, to mark Jose press the extension 815, to mark Julio p...

fdamian01 · 02-09-2016

Hi You may use only one pin to create calls to the PSTN without using FAC. It is supported on SIP IP phones ?? CME 10.0 Phones: 7811 and 7841 Example:A user creates a call to the PSTNAre prompted for a PIN if the call goes right if it is not correct...

fdamian01 · 01-25-2016

hi I'm setting the integration of a Cisco 2911 and Avaya, Cisco calls to Avaya works Incoming calls Avaya cisco not working Stage: Avaya extensions were created 4880,4881,4882PSTN DID number 12345 reaches an extension Avaya 488989901 group receives...

fdamian01 · 01-24-2016

Hi conference functionality does not work in 2911 with PVDM32 all are SIP Phones (7800) In the 7800 model phones I have an active call between two usersUser B Extension: 1234User B Extension: 4321 I press the conference button on the user BI introdu...

fdamian01 · 02-09-2016

Hi You are right a connection PLAR longer works. I did not know that FXO not have any ani is received only in digital trunks. thanks for the help Regards.

fdamian01 · 01-25-2016

changing the port settings voice-port 0/2/3 supervisory disconnect dualtone pre-connect supervisory answer dualtone no battery-reversal input gain 8 echo-cancel coverage 32 cptone MX timeouts interdigit 5 timeouts call-disconnect 3 timeouts wait-rele...

fdamian01 · 01-25-2016

Hi How to interpret this debug. different scenarios voice translation-rule 2 rule 1 /89901/ /800/!voice translation-profile DID2 translate called 2 voice-port 0/2/3 supervisory disconnect dualtone pre-connect supervisory answer dualtone no battery-re...

fdamian01 · 01-25-2016

thanks worked with add ephone-dn =)

fdamian01 · 01-25-2016

Hi I already did the missing configuration, but still the same error, not join calls voice-card 0voice-service dsp-reservation 84dspfarmdsp services dspfarm!!!voice service voipip address trusted listipv4 172.16.1.0 255.255.255.128ipv4 172.16.1.2all...

Member Since	‎01-24-2016 05:47 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	13

User Statistics

User Activity

Programmable feature buttons configuring 7861 CME 10.0 2911

CME 10.0 CUE 8.6.9 IVR CALL NAME

CME 10.0 PHONE SIP PIN code to authorize calls (without FAC)

CME 2911 DEBUG VOICE CCAPI INOUT ANI=EMPTY CODE ERROR=28

Conference does not work CME 10.0 2911 PVDM 32 phone sip

Hi

changing the port settings

Hi

thanks worked with add ephone

Hi