Hi conference functionality does not work in 2911 with PVDM32
all are SIP Phones (7800)
In the 7800 model phones I have an active call between two users
User B Extension: 1234
User B Extension: 4321
I press the conference button on the user B
I introduce the phone number to get into the conference (User Extension C: 6789)
The user C answers
Again I press the button conferencing on the user B conference
A conference between the two last numbers (user B and user C) it is created
UserA A is put on hold is not integrated to the conference
I have configured hardware conference in Telephony service and also in Global Voice register
CONFIG (Version=10.0)
=====================
Version 10.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address 172.16.1.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup gpickup
service dnis dir-lookup
no auto-reg-ephone
max-ephones 58
max-dn 58
max-conferences 3 gain -6
dspfarm units 5
dspfarm transcode sessions 5
dspfarm 1 CME-CONF
dspfarm 2
dspfarm 3
dspfarm 4
dspfarm 5
conference hardware
conference transfer-pattern
SHOW VOICE REGISTER GLOBAL
Version 10.0
Mode is cme
Max-pool is 55
Max-dn is 55
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Forced Authorization Code Refer is enabled
Source-address is 172.16.1.1 port 5060
Authenticate register
Authenticate realm lab.local
NTP Server Address is 172.16.1.1
NTP Server Mode is: directedbroadcast
Time-format is 24
Date-format is D/M/Y
Time-zone is 9
Hold-alert is disabled
Mwi stutter is disabled
Mwi registration for full E.164 is disabled
Forwarding local is enabled
Video is disabled
Camera is enabled
Privacy is enabled
Privacy-on-hold is disabled
Conference hardware is enabled
Dst auto adjust is disabled
Voicemail number is 1000
Call List BLF is enabled
Max redirect number is 5
IP QoS DSCP:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for service
Telnet Level: 0
Tftp path is flash:/its
Generate text file is disabled
Tftp files are created, current syncinfo 0005602083114343
OS79XX.TXT is not created
I have set an example annex transcoder and conferencing
dspfarm profile 2 transcode
codec g729r8
codec g729br8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 2
associate application CUBE
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 1
associate application CUBE
This is the configuration of all my phones
voice register pool 1
lpcor type local
lpcor incoming end-user
busy-trigger-per-button 2
id mac 204C.9EB3.4225
type 7861
number 1 dn 1
cor incoming Nivel11 default
presence call-list
dtmf-relay rtp-nte sip-notify
username 1 password 79161
description 7861
codec g711ulaw
conference add-mode creator
conference admin
SHOW DSPFARM ALL
GNP_GATEWAY#sh dspfarm all
Dspfarm Profile Configuration
Profile ID = 2, Service = TRANSCODING, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : CUBE Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 2
Number of Resources Out of Service : 0
Number of Resources Active : 0
Codec Configuration: num_of_codecs:6
Codec : g729r8, Maximum Packetization Period : 60
Codec : g729br8, Maximum Packetization Period : 60
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Dspfarm Profile Configuration
Profile ID = 1, Service = CONFERENCING, Resource ID = 2
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : CUBE Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 1
Number of Resources Out of Service : 0
Number of Resources Active : 0
Maximum conference participants : 8
Codec Configuration: num_of_codecs:6
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 1 35.1.8 UP N/A FREE xcode 1 - - -
0 1 35.1.8 UP N/A FREE xcode 1 - - -
0 1 35.1.8 UP N/A FREE conf 2 - - -
Total number of DSPFARM DSP channel(s) 3
Apply the hw-hardware debug ephone and I get the following
000292: *Jan 24 12:40:49.355 Mexico: Check associated hwconf with callid 348
000293: *Jan 24 12:40:49.355 Mexico: Unable to associate a dn/chan with callid 348
000294: *Jan 24 12:40:49.355 Mexico: Check associated hwconf with callid 348
000295: *Jan 24 12:40:49.355 Mexico: Unable to associate a dn/chan with callid 348
000296: *Jan 24 12:41:11.771 Mexico: Check associated hwconf with callid 348
000297: *Jan 24 12:41:11.771 Mexico: Unable to associate a dn/chan with callid 348
000298: *Jan 24 12:41:11.771 Mexico: skinny_hwcfb_check_resource: for Audio
000299: *Jan 24 12:41:11.771 Mexico: skinny_hwcfbi_find_next_mtpcb No conference MTPCB for device type 52:Audio only Fail
Annex sh logging and sh run
which is my configuration error?
They know something about this error?
Regards.
