Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just wondered if two cisco router with a classic VPN tunnel would work for remote phones on the UC320. I have heard that because of the UC320's provisioning of the handsets their needs to be a way of turning off things like the wifi settings or an SP...
We have installed a lot of UC540 and UC520 and I find the unit very good. However the UC320 is a different story.Why can you not redial a missed call directly from the phone is beyond me.Why can you not monitor a user on an FXS port is also beyond me...
We also have this issue and have raised a TAC case which was never solved. We think there is an issue with the Firmware for the VDSL interface which only effects certain ISP's in the UK. Our solution was to use the echo life ( dare I say it Huawei wh...
Try this once you are on the console of the CUE. Make sure you change the package for the version you have.
Works like a charm.
# software install clean url ftp://192.168.10.11/cue-vm-k9.uc560.7.1.3.pkg username cisco password cisco123456
You do not have any impedance matching on the line.The following lines are all you need under a voice-port for disconnected party in the UK. But you may have to find the disconnect tone by analyzing on a PC.
Then
voice class custom-cptone customBBV ...
Log into CUE GUI
Scripts are located in system / scripts ( upload as necessary )Script parameters are controlled in voicemail auto attendantBy default Cisco CUE has a default script with enable external transfers set to false. If you enable this you ...
Log into the CUE module from CLI
service module integrated service engine session
Then login in
at the prompt use paste this in
To check any problems at CUE, run the following traces:no trace allclear tracetrace voicemail msgnotif alltrace configapi ...
