Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am currently configuring two Cisco ASA 1120s for Active/Standby failover. So far it is failing. This is what I have done so far. The version that these ASAs are running is Cisco Adaptive Security Appliance Software Version 9.16(4)42. They als...
Hello,I have configured a Cisco 2504 WLC in my home lab. I have a WLAN configured and connect the AP to the switch. The Cisco AP joins the controller, and I can see it, but it does not broadcast the SSID, and the AP blinks Blue, red, and Green.Cisco ...
So after enabling anyconnect on the inside and trying to access it via a PC inside the network. It worked! As for the "Show asp table Socket"Here are some packet captures. I logged into the Anyconnect on the inside and also attempted a login from out...
Thank you for the response.As for the 443 logs I see no traffic when I try to capture logs on that port so it is something with my config that I must be missing. Would you like me to upload my config?
