Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a TAC case opened with Cisco and they are stumped, which has me stumped and questioning life. I am at a point that I am questioning if Cisco has actually fully tested this, and/or if customers are actually using this tool?So I implemented AAR ...
Hello, We have approximately 1k SDWAN edge devices in our SDWAN environment right now. We are looking to add a new vlan to all of the devices and associated IP addresses to the new VLAN. I am aware of how to download and upload config changes via CSV...
I am drawing a blank here, but I am starting to configure our DNA Center appliance and working out some issues with device discovery. We use TACACS authentication in which we use a rolling key via RSA token. This poses a problem since it appears that...
Good morning all, I have created some large ACL's strictly for the task of triggering hit counts for static routes to tell me if the routes are even used any longer (for future cleanup purposes)I am not getting any hit counts (Cisco 9604R) and have r...
Hello, I was creating 2 decently large ACL's to match some traffic today and I noticed something peculiar that has me puzzled. My first ACL has approx 90 ace's and pastes them fine. When I go back and look at the ACL, it looks like there are only lik...
Thank you. I feel this was missing in the AAR documentation from Cisco and often return route traffic gets forgotten about. I had a meeting with Sales Architect's yesterday and confirmed the same thing. I was thinking the rules look at underlay metri...
Are your controllers hosted or on prem?The reason I ask is because there really is no need to monitor if hosted. From my experience this has proved to be a waste of time. I added my vManage to solarwinds by URL and login vs SNMP and there really was ...
If this is a common and consistent thing, then you can use weight. If your circuits are all over the place size wise and color wise, weight is going to be more of a nightmare than you will want to deal with. You can set preferences in app aware routi...
I heard back from TAC and will provide the solution if anyone else runs into this. You need to go under dConfigure and then device templates. Select each template and Change device values and you can download/upload a csv file to modify each device a...
