cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
505
Views
0
Helpful
3
Replies

Addition of SDWAN controllers in 3rd party NMS (Solarwind)

ravi310859
Level 1
Level 1

Hi ,

Scenario: We have recently migrated to SDWAN Fabric from the Legacy environment and already using SolarWind NMS.
We want all the controllers components (Manager , Validator and Controller) to be added in our Solarwind NMS for the monitoring purpose. Kindly provide me any document if it is possible .

 

Thanks & Regards

Ravi.C

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

Check the SNMP configuration to make sure NMS have reachability to the controller :

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/snmp/snmp-book/m-snmp.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I have related answer here:

https://community.cisco.com/t5/sd-wan-and-cloud-networking/snmpv2-configuration-for-vmanage-vsmart-amp-vbond/td-p/5229130

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

Are your controllers hosted or on prem?

The reason I ask is because there really is no need to monitor if hosted. 

From my experience this has proved to be a waste of time. I added my vManage to solarwinds by URL and login vs SNMP and there really was no value other than up/down which being hosted, will never go down.