Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When you setup a Site-to-Site VPN tunnel between an ASA and FTD, do both ends have to be setup using the same type of configuration as in Policy-Base or Route Base? Or can one end be configured with Policy Base and the other end setup as Route Base ...
Hello,Currently we have AnyConnect deployed for our users to connect to the VPN which has no issues on this profile. We setup a new test AnyConnect Connection Profile which has a Group Policy configured to download Client Profile which is the managem...
We are having some issues with some of our new Windows 11 machines being able to successfully authenticate via wired connection to the network. Does ISE 2.6 support Windows 11? I had checked the EndPoint Profile configuration that is being used to ev...
Currently we have a pair of ASA5525 with SFR setup in High Availability mode but have forgotten what the SRF password is.We understand that in order to reset the password on the SFR you login to the ASA and then run the command session sfr do passwor...
We had similar issues a while back and opened a case with Cisco TAC. It was related to a bug and it's only a cosmetic issue. They had me run some commands on FMC to gather some data and then followed up with running another set of commands to delete ...
I agree with @Sheraz.Salim as we have ran into this issue in the past with one of our HA pairs. Take backup of Primary, make note of all the settings of the secondary instance on the chassis, break HA pair and then delete secondary from FMC. Delete i...
Have you enabled additional syslog IDs like the ones below on the Firepower to capture additional informational to help further troubleshoot the issue?750003 750002713050713259713123713019713119713120113019402116
