Hi,I have more than one SIP trunk provider and would like to know how to set that up.I see there is one sip-ua with one set of authentication and password mechanism with one sip-server to send the calls to.Thanks.

Hi,I have a UC520, and I have been trying to figure out why my SIP trunk is not registering. When I looked at the debugs, I noticed that FROM address is '101' - which is the Auto Attendant extension, which is not accepted by my SIP provider. It reall...

Hi,I have a SIP softphone talking to an IP PBX through a PIX.I can register with the PBX with the extension, but I have no voice either way.I have;no fixup protocol sip udp 5060no fixup protocol sip 5060Otherwise, I cannot register with the PBX.I ha...

I am very familiar with the PIX, but new to ASA5500's. I have a company that is looking to have a DMZ with mail, and web servers. The connection to the Net is a T1.In the PIX days, I have no choice but to use a 515 with DMZ.My understanding now is th...

I have a PIX 515 with 3 FE's (DMZ included). I have a switch behind the DMZ interface where the servers are connected to.What I would like to do is to have 2 VLANs (1 for MGMT and 1 for Data), so I can manage the switch in a separate VLAN.Question is...