Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here are the below issues i am facing with Cisco C9120AXI-B-After boot up Cisco C9120AXI-B doesn't stop with continuous debug messages, its not letting to configure IP with CLI.-Its always going into discovery mode and not getting an DHCP IP.-The AP ...
#Team #Cisco #CommunityI need information if Cisco Call manager BE 6000 M6 running with V12.5 can be integrated with UCS-C220-M4 running with V11.5?Can I assign BE 6000 M6 running with V12.5 in an existing cluster as a subscriber Node, where there a...
Hi Jaime,By creating a inter cluster SIP trunk between two different cluster (11.5 and 12.5) can I achieve call controlling, call forwarding in case one cluster is down? Thanks
Hi Jaime,In this case, I have one server (1 physical server) with BE 6K with all new subscribers, on the other hand there is an existing redundant server (2 physical server) running on UCS-C220-M4 . Now with a SIP trunk in between call call control a...
Hi @Hi Vaijanath Sonvane,Thanks for the suggestion. If I follow option 2: With new CUCM Publisher and Subscriber on BE6000 and create a SIP trunk to existing Cluster would it guarantee me the redundancy? The new CUCM will be built in one physical s...
@Roger Kallberg Thanks a lot Roger, the problem is, I already got numbers of subscribers (Phones etc.) in an existing cluster that runs with CM 11.5.There will be a new additional CM 12.5 with new server 6000 M6 plus new phones etc. onto itSo, withou...