About extremal.v

extremal.v · 05-22-2025

Hello everyone! I'm trying to configure xconnect l2tpv3 between c2811 and c888ea. c2811 configuration:pseudowire-class Tun1300 encapsulation l2tpv3 ip local interface loopback0interface FastEthernet0/0.1300 encapsulation dot1q 1300 xconne...

extremal.v · 12-22-2022

Hello!I need help with copying ISE ADE-OS system log files such as console.log, security and audit.log.I can view the list of files using commands sh logging system and I can view the specific file using command sh logging system console.log for exam...

extremal.v · 10-18-2022

Hello everyone!Need a help with cisco ASA 5505 and cisco c888 connection. C888 is used as a switch with trunk configuration on the ports. Cisco ASA 5505 is configured with the trunk port too. When connecting them together the link is up but no mac ad...

extremal.v · 09-20-2022

Hi everyone!Can anyone consult me if there are any problems with ISE licensing in case I want to change an IP address? Can I lose the license if I change the IP address of one of the nodes? Do I have to make a relicensing request? Or I can simply cha...

ISE Tacacs settings for AD users · 04-22-2022

Good day! My question is how to use AD users to access network devices using ISE TACACS settings. I have configuration with internal users and it works just fine. On ISE deployment I've created an internal user, included the user in to the user group...

extremal.v · 05-27-2025

Everythinng worked out when I've changed some configuration.pseudowire-class L2Tunnel1300encapsulation l2tpv3protocol noneip local interface Vlan483interface Vlan1300no ip addressxconnect 10.10.10.1 1300 encapsulation l2tpv3 manual pw-class L2Tunnel1...

extremal.v · 05-23-2025

Hi, Harold Ritter!The sh xconnect command output and some more configration output below.c2811#sh xconnect peer 10.10.10.2 vcid 1300 detLegend: XC ST=Xconnect State, S1=Segment1 State, S2=Segment2 StateUP=Up, DN=Down, AD=Admin Down, IA=Inactive, NH=N...

extremal.v · 12-23-2022

Hi Milos_Jovanovic,Thank you for the reply. I believe this is what I wanted! Can you help me with one more thing?Is it possible to create a policy for read only access for every tabs except Operations Tab? I need to give a user an access to download ...

extremal.v · 12-23-2022

Hello! Is it possible to create a policy for read only access for every tabs except Operations Tab? I need to give a user an access to download logs and reports but the rest tabs must be the read only access.

extremal.v · 10-18-2022

There is a port configuration of ASA and C888.Cisco ASA 5505:interface ethernet 0/0switchport mode trunkswitchport trunk allowed vlan 100,200,300interface vlan 100nameif mgmtsecurity-level 100ip address 10.10.10.1 255.255.255.240Cisco c888:interface ...

Member Since	‎04-21-2022 09:28 PM
Date Last Visited	‎05-22-2025 06:02 AM
Posts	14
Total Helpful Votes Received	6

User Statistics

User Activity

Xconnect on SVI interface cisco 888ea

ISE ADE-OS system log files

Cisco 888 trunk ports

ISE License after IP change

ISE Tacacs settings for AD users

Re: Xconnect on SVI interface cisco 888ea

Re: Xconnect on SVI interface cisco 888ea

Re: ISE ADE-OS system log files

Re: ISE RBAC for Policy Set so team can view but not edit

Re: Cisco 888 trunk ports