Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a wireless router designed to provide visitors just internet access. The wireless router is hanging of the firewall. Here is the configuration I have on the firewall:ip address inside 10.150.179.2 255.255.255.0global (outside) 1 interfacenat (...
memory usage : 94%Firewall has 64 MB RAM.Version 8.0.3I disabled threat detetection and buffer logging, but no change. Rebooted two weeks ago and a decrease to only 88%. Now it is back up to 94%.any idea why high memory usage, or how to troubleshoot ...
I have set this command:aaa authentication login default group tacacs+ local.I can telnet to the switches using my domain logging credentials but I have to use the enable password configured on the switch. How can I set this up so that I use domaine ...
I am getting this error frequently on a 6509 switch:" (enable) 2010 Mar 19 08:20:02 PDT -07:00 %ETHC-5-PORTFROMSTP:Port 9/42 left bridge port 9/422010 Mar 19 08:20:03 PDT -07:00 %DTP-5-AUXVLANPORTOFF:Auxiliary vlan removed on port 9/422010 Mar 19 08:...
I have an access switch. the interfaces don't have the command "switchport mode access" on them. What is the impact when PCs are connect to these ports?
"You also need to realize that 8.0 is normal to run 64MB memory close to its limits"Why is that ? Should the solution be to upgrade memory to 126 MB then?Thanks.
Giuseppe:The VoiP phone are connected to the ports and the PCs are trunked to the phones ports. So, yes, the auxilliary vlans are configured one these ports.So what should I do? Reseat the modules?Thanks.
