Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have an L2VPN issue with XRv, would appriciate if some one can point me to what am I missing here:* there is ping over mpls between XRv's* show l2vpn xconnect is up* show l2vpn forwarding detail location 0/0/CPU0 - show state down!? XRv1 Config...
HiI have configured a Demo Lab JunoS---------XRv5.1.1---------IxiaI have setup on all ISIS and LDPISIS is working finehowever I am not able to get the LDP up, I have taken a packet capture and I see that Cisco is sending both in the hello and in the ...
Official Documentation State Something different in regard to the order of upgrade:http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v551/configuration/guide/cnfg/maint.html#26348We recommend that all devices in your WAAS network shoul...
if the reason you say is that the juniper send notification based on that then they are wrong, see that the max optional value is 4096 however the receiving LSR must calculate according to the lowest not optional:
http://tools.ietf.org/html/rfc5036...
and in continue to the issue I have disabled GR on Juniper and still XRv wont allow the session to come up:Feb 27 08:07:16.184 mpls/ldp/err 0/0/CPU0 t1 [ERR][MISC]:3076: VRF(0x60000000): ldp_tcp_xport_incall: Call from 22.255.1.1 with Adj Grp(22.255...
