About rmxyz

rmxyz · 11-28-2022

Hi,As part of our UCS configuration script, we run the following to configure FI ports as uplinks (example):Add-UcsUplinkPort -AdminState 'enabled' -PortId $PortId -SlotId 1 -FiLanCloud 'A' Before executing this however, I want to check if the port i...

rmxyz · 10-21-2022

Hi,I'm struggling to figure out the right PowerShell cmdlets to use, in order to add a VLAN group onto a VNIC template.To add individual VLANs, this works: $VNICTemplate = Get-UcsVnicTemplate -Name 'ESXi-iSCSI-A' $VNICTemplate | Add-UcsVnicInterface ...

rmxyz · 10-09-2020

We saw this issue last night (assumed by matching vmkernel logs), on a Cisco B200 M5 running ESXi 6.7U3 - UCS package and running version: 4.1(2a), with VIC 1340 adapter running version: 4.4(2d). Took down 39 VMs, unfortunately. Will raise a support ...

rmxyz · 05-25-2018

Hi, I'm trying to associate a service profile (based off a service profile template (SPT)) to a B200 M5, (without local disk) having previously been attached to a B200 M4 with local SSD, but it fails with apparently two errors: Service profile co...

rmxyz · 05-04-2016

Hi, For some reason, UCS Central is showing 7 major domain faults, all of which are like this: Firstly, this doesn't even show *which* domain the error is in, but thankfully we only have two. Logging into UCS Manager for both domains, there are *no...

rmxyz · 10-21-2022

Solved using a tip from another post in here, by looking at the XML submitted via POST request made when performing the action in the browser.$VNICTemplate | Add-UcsFabricNetGroupRef -Name 'core'

rmxyz · 10-21-2022

I'm unable to post because it won't accept any labels that I'm selecting from the suggested labels.

rmxyz · 05-25-2018

Thanks for the reply. The problem is that this SP is that it's bound to a SPT which defines the Local Disk Policy. If I change that to 'Any Configuration' it warns me that it would request a reboot to all other existing SPs (that are in use / running...

rmxyz · 05-04-2016

Hi Wes, Thanks for the reply. The document you've linked to lists: Refresh inventory to recollect inventory data from registered Cisco UCS domain. Verify that the pmon state shows all Cisco UCS Central processes in the CLI.Try manual refresh invento...

rmxyz · 03-09-2016

That's great. Thanks Keny.

Member Since	‎07-29-2015 04:56 AM
Date Last Visited	‎11-30-2022 12:05 AM
Posts	14
Total Helpful Votes Received	5

User Statistics

User Activity

PowerShell: How to determine FI ports are already set as uplinks?

How to add VLAN Group to VNIC Template with PowerShell?

CSCva07231 - VIC 1340 mcpu kernel core

Moving Service Profile from B200 M4 with SSD to B200 M5 without SSD fails

UCS Central shows 'Major faults' but UCSM does not

Re: How to add VLAN Group to VNIC Template with PowerShell?

Re: Unable to post in Cisco Community

Re: Moving Service Profile from B200 M4 with SSD to B200 M5 without SSD fails

Hi Wes,

That's great. Thanks Keny.