Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi team, we cisco routers in our setup and dmvpn is configured in it. Now we are upgrading the cisco router 2901 to 4331. Configurations were replicated as same like old on but we are facing issue in DMVPN is not coming up. Please find the debug logs...
Hi Team,
I have Switch Environment in Ring Topology and have a core switch where DHCP server is connected. Ring UPLINKS are Portchannels.
Our requirement is to enable DHCP Snooping, hence we enabled dhcp snooping trust in all uplink physical interf...
Hi there,We have four 3750 switch in stacking and connected in ring topology.We are facing issue in switch stacking and we getting following errors in switch logs. From the attached logs we are noticing switch 1 stack ports and connected ports are fl...
hi team,I am runing ACS 5.3 version and i am getting error messages like below System Alarm [Database Purging] Mon Sep 09 04:00:00 Incremental Backup Not Configured System Alarm [Database Purging] Sun Sep 08 04:00:00 Purge Configuration Repos...
Hi team,I have two core switches - 4506E, and i noticed there are frequent cpu spikes on both of the cores switches. As its spikes intermitendly i couldnt able to anlyze the issue. I need inputs on the following,1) Is there any Free CPU process monit...
Hi all,After replacing the stack cables, issue got resolved and we replaced stack cable one by one, from switch 1 to switch 4 and then from switch 1 to switch 2. while doing this cable change no downtime required.
Dear Team,We used NM-2CE1B in cisco 3745 router, on first port is running with PRI circuit and i would like to configure the second port to 2Mbps MPLS link. whether this card will support for my requirement.Note: ISP is given ethernet output which is...
