Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Recently I have tried to replace the 7200 series router with the C-3560-E L3 switch but the web-caching seems like not working. I can see both WAEs registered to the switch but no traffic transmit out from the WAE. When I ran the show ip wccp web-...
Hi,I would like to find out whether this switch come with the fiber optic interface or not. Is it only provide the SFP and we need to purchase the module?Appreciate for any comment and adivce. Thanks.
Hi,I just checked on my WAAS console and realize that there is a critical error for license is missing for few of the WAAS devices, is anyone know what kind of license is needed? Only some of the devices having this error the rest are fine.Appreciate...
Hi all,Recently I have configured a voice gateway 2821 with 2 X 4FXO ports and 4FXO for incoming and the others are outgoing. The incoming call is working fine but the outgoing always showing engage tone. I have configured these 4 Outbound FXO lines ...
Hi,I have configured the CUE with the CTI ports and all are registered on the Call Manager but when I tried to call the voice mail from the IP phones it sounds engage tone; if I call the direct DID number I can hear the greeting so I guess there is s...
Hi Zach,I have spent some time to check the design and draw a diagram as per attached. We are using ACNS to cache the web content and I have managed to configure the switch to redirect web-cache traffic by using L2 with Mask assignment but still havi...
Hi Zach,Now we are running the C7206 router the web-cache is working fine. The following is the configuration of the router interface:!interface FastEthernet0/1 description ** To WAAS Devices ** ip address 10.10.7.1 255.255.255.248 ip pim sparse-mode...
Hi Zach,Yes, we are running Web sense in the 10.10.7.0 network. Basically I thought it is as easy as just replace the router with the switch and modify the WAAS to support L2 web cache redirection but it seems like there are more steps to involve.Ple...
Hi Hyoun,For my case the problem was not the CUE configuration issue and it was caused by the telco backend switching hardware faulty so after they have changed the equipment everything back to good.I hope this helps.Regards,WB
I have verified with Cisco and these is a bug for version 4.1.3a firmware which caused the licensing issue so upgrade to 4.1.5c will resolve this problem.Anyway, thanks for your comment.
