Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have wireless VLANs configured with LEAP/ACS. We need to be able to allow guest to attach to the wireless network (they will use a special VLAN) without authenticating to Active Directory. Can this be done?
We have ACS up and running with no problems. We have a special VLAN for a public kiosk that customers can use to surf the internet. The kiosk is wireless and is configured to auto-login with a specific account. The access-point is using vlan 1 and...
I had the following config on my PIX 515 and everything was working (IP's have been changed)ip address outside 1.2.3.4 255.255.255.224ip address inside 192.168.150.2 255.255.255.0ip address dmz 192.168.47.1 255.255.255.0global (outside) 2 1.2.4.5 net...
I just ran a security scan on my network and it shows that my 3524 switches and the L3 module in the 4006 switch has POP3 running. I tried to telent to the IP on port 110 and it opened a connection - as soon as I press a key the connection closed. ...
I have that working but the connection at the other end of this interface only accepts connections from one IP address - which is assigned to the interface of the PIX. Right now if a users needs access to the system and they are on the wrong networ...
Thanks. I tried it and am having a few problems. The IPs are just examplesInternet T1 is connected to my Router, fastethernet port of router (12.1.1.1) is connected to external vlan on core switch. - Firewall is connected to external and internal v...
I solved my own problem. I regenerate the known host-key for my PIX and right after that the IDS established the connection. Not sure what happened but its working now.
