Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am looking at a DWDM solution that involves the optic DWDM-SFP-10G-C-S. These optics have a max rate of 10G. My question is does the C9300x series switches support etherchannel/lacp configurations using these optics? A simplified breakdown of what...
I am considering a C9606R for a solution. When it comes the line cards and interfaces I am looking at the C9600-LC-24C line card. When looking at the optics compatibility chart https://optics.cisco.com/?dr=7&dr=5&rh=18&npid=2223 I can see the vari...
@Sow2534 can you explain the "Tunnelling task" in more detail. I'm wondering if a VTI would be useful in your scenario:https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/device-config/770/management-center-device-config...
DWDM - Dense Wavelength Division Multiplexing SFP. In my scenario, a DWDM Multiplexer (mux) is being used to take up to 40+ fiber pairs and multiplex them over a single fiber pair. This is used when a limited amount of fibers exist between location...
BB,Thanks for the response. I am very familiar with the C9300 and etherchannel, I just wasn't so sure about the DWDM optic. The link you provided is the datasheet for 10G optics and does not include the DWDM optic I'm referring to. My question is m...
Anytime you have fiber between devices the following items come to mind: Connectors- the fiber connector can be a multitude of shapes and sizes with LC being a commonly used type.
SM vs MM: Single mode (OS2) fiber is generally used for long distan...
In the Cisco Catalyst Center 2.3.7.4 on ESXi Deployment Guide, it mentions "Download the Catalyst Center on ESXi OVA file from the location specified by Cisco." In the Cisco Software Center, the only available OVA available for download is the DNAC-...
