Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello @All,is that possible to use SFP-10G-LR-S= on Port 49-54 instand of QSFP28 with Linkspeed 10Gig?The spec that: The uplink can support up to six 40- and 100-Gbps ports, or a combination of 1-, 10-, 25-, 40, 50-, and 100-Gbps connectivity, offeri...
Dear all,
@frist, happy new Year @Aliki.
My Question, is that possible to share 2 differnet IPS lines on one WLC?
Example:
WLC IP Magmt: 10.10.1.10, Port 1, VLAN 110 and Network 10.10.1.0/24 configured on Core SW and over FW to Internet Line1
WLC I...
Dear all,
currently I have a
WLC 2112 / IOS:5.2.193.0 (up and running)
and 5 AP 1131AG / IOS 12.4(18a)JA2 (up and running)
1 AP AP1230B (NEW)
My questinon is:
1. Is that possible to have a mixed AP enviroment with this 2 diff. AP's?
2. If yes, wha...
Hi together,
we have several 2950 Switches and wont to upgrade them to newer FW with K9 crypto.
The only IOS what I have found is version c2950-i6k2l2q4-mz.121-20.EA2.bin but this one seems to have problem with Network traffic.
So my qestion is, is ...
Dear all,
i have a problem after update my WLC from 5.2.193.0 to AIR-WLC2100-K9-7-0-252-0.aes
My steps:
download AIR-WLC2100-K9-7-0-252-0.aes
open WLC Gui
disabale all WLAN
go to command and download Image via FTP
press reboot
press save and reboot
...
Dear Flavio and Manish,you are both right! My solution was a "untagged" port configuration. Before it was not working but it was my fault because I typed a vlan ID on the field! With VLAN ID 0 the port is "untagged" and now every thing is working!Tha...
Dear all,
regarding to this post, I looking for a download Link for IO WS-C3550-48-SMI Switch.
The only link i have found is this:
https://software.cisco.com/download/release.html?mdfid=275935152&softwareid=280805680&release=12.2.44-SE6
But there is...
Dear all,
i have now fixed the problem by usig a different IOS K9-7-0-220 Image.
But there is one more little problem. There is no ICMP insite / outsite possible.
That meens no Ping to WLC and from WLC to outsite.
But access to WLC via https - OK and...
I have now try several time to get the AP up and running with my WLC but the only thing is a endlos loop of rebooting with this error message:
*Mar 1 00:00:23.469: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY*Mar 1 00:00:23.523: %LWAPP-3-CLIE...
