Wasted 2 days on the Office 365 config, just to find out that it cannot be accomplished. Unity cannot accespt EHLO messages from Office 365 and in Office 365 we no longer can force a connector to use HELO. Cisco bug ID
... View more
The only problem with this approach is that during business hours for just a split second you'll here hold music before you will hear phone ringing, that is the time that takes for Unity to pass the call back to hunt pilot. For my management that is not acceptable as they do not want this hold music playing. Time of day routing is perfect in my case as the call will go straight to hunt pilot.
... View more
We have a Cisco switch in each office and every now and then the port that has the D-Link Wireless AP ( DAP-1522 ) connected to it goes to err-disable state. Actually sometimes even a regular port that has a cisco phone connected may also go to err-disable state (less often). So I have to telnet into the switch and issue shut and no shut command on that interface to get it back to life, then it works for a few days or weeks until it happens again. Can you guys recommend a suitable configuraiton for that interface, that would prevent that from happening or a workaround ? Here's the info: Model: cisco WS-C3560-24PS and cisco WS-C3560-48PS Image:c3560-ipbase-mz.122-35.SE5.bin This is the log from one switch: 31w5d: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/2, putting Fa0/2 in err-disable state 31w5d: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 74e2.f592.f7f2 on port FastEthernet0/2. 31w5d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down And from another, which is almost the same: 5d10h: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/3, putting Fa0/3 in err-disable state 5d10h: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address d8a2.5e31.2cf6 on port FastEthernet0/3. 5d10h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down 5d10h: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to down Here's the configuration of fe interfaces (they are all alike): interface FastEthernet0/2 description Voice & Data Combo Port switchport access vlan 11 switchport mode access switchport voice vlan 15 switchport port-security maximum 4 switchport port-security maximum 3 vlan access switchport port-security maximum 1 vlan voice switchport port-security switchport port-security aging time 1 srr-queue bandwidth share 10 10 60 20 srr-queue bandwidth shape 10 0 0 0 mls qos trust device cisco-phone mls qos trust cos auto qos voip cisco-phone spanning-tree portfast I'd appriciate any help. Thank you!
... View more