Hello Team,I have recently passed Cisco 350-401ENCOR & 300-410ENARSIDetail350-401ENCOR ---passed on 20th-nov300-410ENARSI ---passed on 30nov-22In certmetric exam metric I can see both exams.However on Cert status I can only see CCNP is re-certified C...
Hello Folks,How we decide which protocol belong to which layer ?My understanding is , it depend on the protocol filed in case of IP(Protocol: ICMP(1) ) and Type field in case of Ethernet.So lets say if IP Protocol:ICMP(1) then it is encapsulated ins...
Hello Connections, I have simple topology as below.I am trying to accomplish the transport from R1 loopback to R4 loopback using BGP labled unicast. R1-----R2----ASBR1----ASBR2---R3----R4 R1--R2--ASBR1 --ospf 1 runningASBR2--R3--R4---ospf 2 runningR2...
Just wondering why ospf DB packet have o bit set as 1 in option field, in non MPLS-TE network.
As per RFC 5250
A neighbor is opaque-capable if and only
if it sets the O-bit in the Options field of its Database Description
packets; the O-bit SH...
Hello,
Can anyone tell me MPLS VPN label is used as control plane or forwarding plane.
From wireshark it seems vpn label information shared in mp-bgp updates, so I assume it to be control plane.
Thanks,
Mrityunjay
Hi Deepak Kumar,Thanks for your input.Basically I am trying to understand the logic for defining any protocol as L2 or L3.MY understand is if the any protocol encapsulated into IP its Layer 3 , if it encapsulated into ethernet then it is L2.Did I ge...
Hello Harold,Thanks for the update.I tested the solution on IOS using ebgp peering between the node and the end to end labeled tranport is working fine.However for IOS-XR the solution do not worked , though I used /32 static routes on all the router ...
Hello Harold, Lets say if we remove the IGP totally and create end to end BGP LU using physical interface will it work?Why we need LDP if BGP is capable of generating label for transport. Thanks,Mrityunjay
Hello Tiger,can you change the below IP route statement on RR1.no ip route 3.3.3.3 255.255.255.255 10.10.20.1ip route 3.3.3.3 255.255.255.255 10.10.30.1
Its seems reverse route for 1.1.1.1 need to put on RSW or redistribute static into ospfShare the ...