Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently I changed our default gateway from a pair of PIX515 to ASA5510. Since I changed the gateway anyone connecting to our wireless VLAN/network who tries to access the Internet may or may not get a page load. If the page loads it is extremely...
We have gone through a WAN link consolidation and I have several WIC-1DSU-T1-V2 leftover. Is there a way to connect these together in a lab enviroment to simulate WAN connections. I know the traditional way is with serial WICs using a DTE/DCE cable, ...
The connecting port at the switch and all interfaces in the AP need to be trunk ports and the native VLAN between the switch and AP must be the same. All you need is a helper address on your SVI interface for DHCP.
We experienced the exact same issue when we moved from our 3500s to 3750s. The issue ended up being a TCP port I was filtering through a VLAN filter. If you have any filters/ACLs applied try removing those temporarily and see what the result is.
I've had the same issue with our HQ VPN to foreign office, with the HQ VPN DF flag set like you described. If the web server is MS IIS try appling MS black hole detect reg edit. This resolved our issue.
