Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anybody know if there is a simple tool like PathPing that can pinpoint packet loss and can be configured to run for eg. 24 hours. I need it for windows XP preferable a cmd line tool like PathPing. Thanks Simon.
Does anybody know if there is a simple tool like PathPing that can pinpoint packet loss and can be configured to run for eg. 24 hours. I need it for windows XP preferable a cmd line tool like PathPing. Thanks Simon.
Hi !I would like to upgrade Catalyst 6000 supervisor 2/MSFC2 to release SXF17a.I need an external flash card MEM-C6K-ATA-1-64M=.Question: Is this flash card supported by the rommon on my SUP22 ?Pls find show version, show module and remote command sw...
Hi.I wanted to boot a cisco 7206VXR router on IOS c7200-is-mz.124-18e.bin.However the router keep booting on the older IOS c7200-is-mz.122-15.B.bin.The configuration/status before I reload:1. Configuration register is 0x21022. gw-btvoice-sto2#sh run ...
3750#sh vlan id 2612VLAN Name Status Ports---- -------------------------------- --------- -------------------------------2612 adm_ANS_SAfe_RFS10569 active Gi1/0/25, Gi1/0/26, Gi4/0/2, Gi4/0/3, Po1VLAN Type...
Hi DanWe agree that 3750 support 1024 (or 1004). However your answer saying that even vlan exceeding 128 runs spanning-tree confuses me.In my 3750 I have approx. 250 vlan and "show spanning-tree summary" show 128 vlan that ieee STP.This is the output...
Thanks for your answer. I already downloaded winmtr. RegardsSimonFrom:namohamm To:Simon Vyrdal/Sweden/Contr/IBM@IBMSEDate:2010-12-30 08:29Subject: New message: "Tool like PathPing that can pinpoint packet loss and can be configured to run for 24 hour...
Hi Podhillo.Thanks for your answer (I see that you are CSE at CiscoSystems)YOUR WROTE:•64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M=)—Only supported on Supervisor Engine 2. The device name is disk0: and the card requires ROMMON version 7.1(1) and later...
