Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ASA 5515 With FirePower
ASA Ver: 9.6(4)
Licence: Security Plus
Anyconnect Ver: 4.4.03034
Issue:
The ASA is used for Anyconnect remote access. This works fine for around 3-4 days and then the clients cannot resolve DNS. The anyconect client is still...
Hi,
There are actually two questions here that I need responding to but the primary one is around the deletion of a MAC address entry in a identify store.
I have ISE 2.2.0.470 instilled and for wired connections we use dot1x for pc authentication...
Hi,
I have a strange issue where I am hoping the community can comment and help me.
What I have is 4 devices split across two sites over a L2 circuit and I am having issues pinging end to end. To explain more the topology is as follows:
4500-X VS...
Hi,
I have a issue with a module in a VSS cluster using 6708 switches. There are around 60 multi chassis-etherchannel connections to access layer devices connected but I have a issue where all connection on one module are all showing down. The modul...
Hi, Hopefully someone can help here. I have CUCM 10.5 installed and configured with IMP 10.5 and for a softphone we are using Jabber 11.0 with the exact versions here CUCM - 10.5.2.10000-5CUIMP- 10.5.2.20000-1Jabber - 11.0.0 Build 65527 CUCM is confi...
Also since these devices are all on the same VLAN I would expect not to have to use a default router or default gateway if I am pinging with a source interface of the SVI 759.
Hi,
Yes the devices except 3850-B have SVIs with IP addressing in the same subnet
6807 - 192.168.241.19/28
4500-X - 192.168.241.18/28
3850-A - 192.168.241.20/28
3850-B - No IP address
As I mentioned all devices have VLAN 759 for L2 and then the ab...
Hi, I managed to work this out. For LDAP/AD authentication according to Cisco documentation the IMP servers are supposed to proxy authentication requests to the CUCM servers and they handle the authentication with the LDAP/AD servers. This is not the...
Hi Ankoor, I have tried to login to the cupuser web portal with LDAP /AD credentials but it failed. We have also tried the client with auto-discovery and manual settings with both failing on the LDAP login. Local users are working with no issues it i...
