We are running UCCX 8.5.1. We want to roll our IPPA service back to the primary server. How do we go about doing that? The only way we know we are not using the primary is when we hit the services button on the phone and choose the primary "IPPhoneAg...
Background:I have setup VOIP at 3 different remote sites connected via Layer 3 routing and single mode fiber. Each site has it's own voice gateway. I have it setup that the DHCP scopes for data and voice are received from our central data center offs...
I currently have a WLC4412 and with 11 APs and 2 SSIDs. I need to have 1 of my APs only broadcast 1 of my SSIDs. Is this possible? If so, please lead me where I can learn how to configure the WLC. Thank You!
Would anyone know if I would run across any issues when upgrading from a Cisco Wireless controller WLC-12 to a Cisco wireless controller WLC-50? Can anyone forsee any issues with me just copying the startup config from the WLC-12 to the WLC-50? Any a...
Would anyone know if I would run across any issues when upgrading from a Cisco Wireless controller WLC-12 to a Cisco wireless controller WLC-50? Can anyone forsee any issues with me just copying the startup config from the WLC-12 to the WLC-50? Any ...
Just wanted to say THANK YOU! for posting your solution. Your solution was a tremendous help to me in finding a solution to a similar issue I was having!
Look I am a novice at QOS, so don't expect any great help here but this is my 2 cents. At least I am tring! LOLIt is my understanding that "dscp" is ment over a layer 3 link. Do you have these switches connected via a layer 3 link?Also, I understand ...
Let me just say THANK YOU!!!! You rock ROB!!! You have fixed my problem and lead me in the right direction for future changes. This is not the firt time you have helped me. I cannot say Thank You enough!!!!
To be more detailed. The wireless controllers are:From: Cisco Aironet 4402 Wireless LAN Controller 12 APTo: Cisco Aironet 4402 Wireless LAN Controller 50 APCan anyone forsee or know of any issues I could run accross if I copied the startup from the 1...