Hello all,I have a 9130AXE AP I want to configure as Embedded Wireless Controller, I have followed the documentation, so far I have1. Downloaded 9800-AP Universal zip file which has the required files and images2. I have factory reset the 9130 AP, an...
I am trying to install Cisco ISE in my lab, I tried to download the evaluation version of ISE (version 3.1) but it is a OVA file and I use Hyper-V.Since hyper-V does not support .OVA filesDo I convert the OVA file to VHD to import into hyper-V or dow...
@marce1000, thanks for the link sharedas part of the requisites, there should not be any WLC in the network during setup of EWC, I'm guessing this may be an issue, although I don't expect it to affect it the new AP from being reached by any device in...
Hi @Flavio Miranda Currently on a 8-port C1000, check power-inline, AP is consuming 30wattsThe switch configs:defaultinterface GigabitEthernet1/0/4switchport mode trunkendusing Management vlan (vlan 16) as native vlaninterface GigabitEthernet1/0/4swi...
Hi Mohamed,I just re installed on hyper-v, I selected generation 1 during setup this time, and it worked, that's the only change I made between the two VM setupsBut I still have issues transfering files via sftp too, I will look into that in soon tim...
I would open a new topic for the issue, but for now kindly point me to the right software to use for cisco ISE patch file transfer as I have used FileZilla, Solarwinds tftp server and now 3CDaemon, I also tried using psftp but the program closes as s...
