Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does ASR1002 supports dot1q subinterface mapping to each vrf in a Port-Channel? and with BFD enabled?
For example
ASR1002#conf t
interface Port-channel1no negotiation autono bfd echolacp min-bundle 2
!!interface GigabitEthernet0/0/1no ip addressno n...
CPT600 running with CTCR95. There are 3 FOGs,Group ID 39 - FOG39 - Ten GE Port 1 of Slot2 PTM-4 card and Ten GE Port 2 of Slot2 PTM-4 cardGroup ID 37 - FOG37 - Ten GE Port 1 of Slot4 PTF-4 card and Ten GE Port 2 of Slot4 PTF-4 cardGroup ID 38 - FOG3...
So, as the bfd neighbor is on vlan 101 and vlan 201, the actual configuration will be?
ASR1002#conf t
interface Port-channel1
no ip addressno negotiation autolacp min-bundle 2
!!interface GigabitEthernet0/0/1no ip addressno negotiation autochannel-g...
