I had some issue with the Cisco network assistant to connect via https to Catalyst switches running IOS version 15.0(2).
This is due to the fact that Cisco CNA still use SSLv3 to connect securely to the devices but SSLv3 has been disable f...
Have you tried to move the SFP-10G-LRM that is not recognize to another module (swap it with the working one).
This will tells you if the module might be faulty or if it is the SFP.
Have a good day.
802.11n is available on your WLC 2504 using WLC 184.108.40.206
Here is the link to the configuration guide in order to activate 802.11n:
It makes sense that you cannot see the webpage from your internal network using the public IP address.This is because of the NAT configuration.
And there is no reason to be able to connect from inside to the web server using your o...
If you can't login to your device because of high CPU, you won't have any other choice than disconnecting it from the network (this might reduce CPU load) then you will be able to connect.
If you still have no access, then you...