Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone experienced an issue getting CRC errors whole using CPAK-100G-LR4 with CFP2-to-CPAK port adapter?I am seeing lot of CRC errors on HundredGig interface connected to CPAK-100G-LR4 using CFP2-to-CPAK port adapter on A9K-MPA-1X100GE of A9K-MOD...
Hello There,We have 2 MPLS PE routers RouterA and RouterB. RouterA has 10.0.0.0/8 in its routing table, and we do not want 10.0.0.0/8 to be exported to RouterB's routing table. to do that, we created route-policy on RouterA matching 10.0.0.0/8 prefix...
Hello There,We are trying to utilize Aggregate route summary feature on our MPLS network with customer connection and looking for advise on it.There are multiple customer connections from multiple MPLS edge routers on same VRF. On one of the customer...
Hello There,Can anyone provide a suggestion to upgrade our ASR9006 router with RSP880, MOD80-SE and MPA-20x1GE on it?I see 7.5.2 a suggested release with 64bit version that can work with A9K-RSP880-LT-SE on ASR9006 but not sure if there is going to b...
Hello There,We are using "aggregate-address 192.168.0.0/16 (Just an example) summary-only" to advertise summary prefixes to ISP. Is it possible to manage inbound traffic via specific ISP by doing AS-Path prepend for more specific subnet i.e. 192.168....
Yes you can. just make sure in this combination 100Gs to be used in first 2 groups (Group 0 and Group 1) then Group 2 and Group 3 can be used for 10G ports. you can't use 10G in group 0 and then 100G in group 1 or later.
Thanks, I guess for us, we have purchased the AIP (Perpetual license) and we applied that on router, but on license status, its getting un authorized status with Subscription based ESS/ADV licenses. Is there a way to say disable Subscription based li...
Hello @tkarnani ,Thanks for sharing the doc. sorry to deviate from the actual question, but I have a question with similar area if you can help clarify.What is difference between Advantage/Essentials vs ASR 9000 Advance IP license? we are running 7.1...
Recently we experienced same issue where P2P IP connectivity was not stable (dropping ping in between) and BGP dropping every 3 minutes. We found the subnet mask was configured wrong on CE router with /28 instead of /30. after fixing it, ping and BGP...
