https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-8/system-security/configuration/guide/b-system-security-cg-asr9000-78x/implementing-certification-authority-interoperability.htmlipsec was added in later code just for ospf
the ciscoMemoryPoolUsed are the older oids for checking memory; they are capped to Gauge32 and will be wrong with systems over 4GB. if you have a system with memory over 4G its best to use the 64bit
then compare with this output "show memory summary...
Hi, you can upgrade via usb
however it wont be graceful, it will wipe the routers disk and have it running the new code
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/system-setup/75x/b-system-setup-cg-ncs5500-75x/perform-disaster-recovery.html
...
i made a mistake there>>hw-module port-range 0 1 instance 3 location 0/0/3 mode 400>> location should be the line card, 0/0/cpu0, 0/1/cpu0 etchttps://xrdocs.io/ncs5500/tutorials/introducing-nc57-mpa-2d4h-s/example from the guide;hw-module port-range ...