Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have made a very simple eem applet to monitor some IP SLA entries in near real time -
!
event manager applet AUTO_SLA
event timer watchdog time 3
action 1.0 cli command "en"
action 2.0 cli command "term len 500"
action 3.0 cli command "show i...
The company I'm working for has had a security audit done which has identified low OSPF router priorities as a security risk. The generic blurb quoted in the explanation says that a malicious user can use this to influence routing decisions. I've nev...
Hi all,I have a customer who's looking for clear channel Cicuit Emulation and the NM-CEM-4SER looks to fit the bill, but he is being told that Cisco no longer supports them. Can someone confirm if this is true or not? Doesn't seem to make much sense ...
Hi Chaps,I have an OSPF area for which I wish to select which external routes enter it. This area has default routes comming from two points, so I cannot make it a stub area as to do so makes the default route injection unconditional, which I don't w...
In the HSRP RFC, 2281 it states -"6.3 ICMP Redirect While running HSRP, it is important to prevent the host from discovering the primary MAC addresses of the routers in its standby group. Thus, any protocol that informs a host of a router's primar...
I'm running this on IOU and I have exactly the same problem. Output from a single puts action is broken after line 8 by the system prompt, after approximately half a second the remaining output is completed.
Thanks all, couldn't see if I was missing something. This was my first main reaction " if they can get access to a router i think changing the OSPF priority is the least of your concerns."As you all point out, if you're following all the other secu...
Hi,Unfortunately your question, as posted, makes absolutely no sense whatsoever. Might I suggest that you ask someone who is familiar with english to help with your translation. Once we understand your question we'll all try to help.CheersPete
Just so you know, both of these are front ends to functionality that is built into the linux kernel. The linux 'tc' command relates to traffic control and supports a few queueing disciplines such as priority queueing and custom queueing. One of the q...
Thanks for the response. I've finaly found an obscure reference in a PDF that states the 4SER and the 4E1 CEM cards were end-of-sale April 2010 -http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdfNice of cisco to make this i...
